Inspiration for paving your patio with concrete

Inspiration for paving your patio with concrete


According to manufacturers, the best type of concrete to use in patios is the pre-blended mixture of sand and gravel. The reason for this is that it is the most durable concrete, thereby robust enough to resist cracking. Furthermore, it is usually advisable to use concrete because if you compare with other paving stones, it is a lot cheaper. Approximately concrete costs $7-$10 per square foot while paving stones cost $9-$14 per square foot. It is thus evident the tremendous saving you make by opting for concrete rather than paving stones.

When you have a concrete patio for a while, there are ways you can make it look better by doing several things like painting pattern or add a beautiful outdoor rug. Here are some inspirations on how to pave your patio with concrete.

Prepare Your Budget

Depending on the size of the patio you want, you need to calculate the concrete you need. Using concrete is usually cheaper as compared to other options; but you will still need to plan. There is an easy to use online concrete calculator this calculator asks for what shape of patio do you want. Whether it is square, rectangle, circle, this calculator provides you with an estimate of the concrete you will need, and you can easily calculate the money required.

Mark The Area

Before you decide on what you want your patio to look like, it is essential to consider which part of your property you would like the patio to be. While deciding where you want your patio to be, if you want privacy, you need to make sure that you have that place. Patios have deferent shapes; you can decide on a curve patio that looks very beautiful. However, if you are going for a square or rectangular, it can be challenging doing the slab. After making all the decisions, make sure that its sizes are right for the patio.

Preparing The Area

It would be best if you prepared your patio area; you do this digging a bed. Your complete patio’s surface level should be dug 150mm. This is to make sure that the soil is evenly compacted. After doing this, lay a compacted sub-base of 100mm and cover the area with a concrete mix. It is important that the patio had a thickness of 4 inches, although if you have furniture, it should be 6 inches or 8 inches, especially where the furniture will be.

Add The Sub-Base Layer

To have its best performance, you should lay around 70mm of uncompacted hardcore to be left with 50 mm when compacted. This is because it needs to be well-drained and dried before concrete is added. If the sub-base layer is unstable, then the concrete will gate wasted, and it will end up affecting your whole project. So you should be cautious and make sure that the sub-layer is completely dry.

Mix The Concrete

Mixing concrete can be a challenging task; this is because if you don’t know to do it, you can easily ruin it. This is because if you add to much water, you will weaken your mixture, so you gradually need to add water. To mix your concrete, you can use a bucket or a wheelbarrow; you can mix it using a shovel. The concrete should be thick, and if it is crumbly is too dry, and you need to continue adding water. To make this work more comfortable, you can separate the concrete into three segments.

Laying The Slabs

Before continuing with anything thing yet, it is you should wear a knee pad and gloves to avoid burns from the wet cement. First, dampen your patio slabs, so they do not dry out your concrete too quickly, and when lowering, it ensures that you are very careful. You should separate the slabs with a gap of 8mm to 10mm and wait for about 24 hours for the concrete to set.

Fill The Joints

When the cement has dried, you can fill in the gaps between the slabs. You can fill in these gaps by using paving stones, cobbles, or even tiles. However, you can also use cement and water to fill in these gaps.

Slabs stain very quickly, so be careful not to ruin them. After filling in the joints, you should not step on the patio for 24 to 48 hours. For your new patio to be on full strength, it takes concrete about 28 days to dry up.

Inspiration for paving your patio with concrete

Curing Concrete

Fresh concrete is susceptible, and you need to ensure it doesn’t dry up since it leads to the concrete hardening. After your concrete has been poured, it is very easy to cure it. First, you must ensure that you maintain its proper dampness. You can achieve this by covering the slab with a plastic sheet. Depending on the weather concrete takes about a month for it to reach its full strength. Between 24 to 48 hours, you can walk on the surface because it has already set, but it is advisable to let it reach full advantage.

Finishing touches

Since you have done most of the work, make sure that everything is, so there’s no residue on the surface. You can also opt to dig a gutter and fill it with pebbles to neaten up the place. Also please checkout san jose epoxy garages for latest garage floors ideas and designs.


As you have seen, the process of paving your patio takes a lot of steps you can do it yourself or hire a skilled professional to offer you their expertise. With concrete more robust and durable, it is a more popular among most individuals. Depending on how you install your concrete, it can stay for 30 to 100 years, and it is durable in any environment. Concrete is low maintenance and does not burn or rot and is resilient to fire, earthquakes, and water.